Requesting a Quote for Thermally Modified Ash: What to Include

Specify Your Project Dimensions Accurately

The foundation of any material quote is accurate project dimensions. This goes beyond a simple total square footage. For vertical applications like siding or cladding, you'll need the total linear feet of each wall section, along with heights. For horizontal applications like ceilings or soffits, provide length and width.

Consider all surfaces where Thermally Modified Ash will be installed. This includes main wall sections, soffits, accent areas, and any trim. Measure each distinct area independently. For example, a wall with multiple windows or doors will require separate measurements for the areas between openings, above, and below them. Provide these measurements in feet and inches to avoid rounding errors.

Choose the Right Thermally Modified Ash Profile

Thermally Modified Ash is available in several profiles, each suited for different applications and aesthetic preferences. The profile you select significantly impacts the look, installation method, and ultimately, the quantity and cost of your materials.

Common profiles for Thermally Modified Ash include:

S4S E4E End Match: This profile, typically in nominal sizes like 1 × 6 Plus or 5/4 × 6, is often used for siding, ceilings, and specific decking applications. The end-matched feature allows for installation without requiring joints to land precisely on a stud, which can reduce waste and speed up installation.

S4S E4E: Available in nominal sizes such as 2 × 4 and 2 × 6, this profile is frequently specified for decking and other structural details. Larger dimensions like 1 × 10, 2 × 2, 2 × 4, and 2 × 6 are also used for trim and molding.

Carefully consider the desired shadow lines, the visual weight, and the functional requirements of your project when choosing a profile. Your selection should align with the overall design intent and the specific demands of the application (e.g., vertical cladding versus a walking surface).

Refer to the product page for Thermally Modified Ash to see available profiles and their recommended applications: /thermally-modified-wood/ash

Detail Your Project's Application

Clearly stating how you intend to use the Thermally Modified Ash is important. This helps confirm that the chosen profile is appropriate and alerts the supplier to any specific considerations for your project. Applications can include:

Exterior Cladding/Siding: For facades, accent walls, or entire building envelopes.

Interior Feature Walls: Creating a natural, warm aesthetic inside.

Ceilings and Soffits: Adding visual interest to overhead surfaces.

Selected Decking: For specific walking surfaces where the profile and installation system are confirmed to be suitable.

Trim and Molding: For finishing details around windows, doors, or corners. Knowing the application allows for recommendations on complementary products, such as appropriate fasteners or rainscreen components, if needed.

Provide Your Project's ZIP Code and Access Details

Shipping costs are a significant component of any material quote, especially for specialty lumber. Providing your project's ZIP code allows for an accurate freight estimate. Without this, any initial quote will likely exclude shipping or provide a broad estimate that may change.

Beyond the ZIP code, consider access to your project site. Will a large truck be able to deliver directly to the site? Are there any limitations like narrow streets, weight restrictions, or specific delivery windows? Detailing these factors upfront can prevent delays and additional costs during the delivery phase. If special equipment like a forklift is needed, or if materials need to be hand-carried a significant distance, these details are helpful.

Outline Your Project Timeline and Quantity Needs

Knowing your desired project start date and when you need the materials on-site helps assess availability and plan logistics. If you have a flexible timeline, it might open up more options for material sourcing or delivery scheduling. If your timeline is tight, communicate this clearly.

While we can assist with material quantity calculations, providing your own estimated quantity in linear feet or square feet, alongside your detailed dimensions, offers a useful cross-reference. Remember that coverage area and purchase quantity are not always identical; it's common to account for waste due to cuts, defects, or future repairs. A general waste factor of 10-15% is often recommended, but this can vary based on the complexity of your design and installer experience.

Worked Example: Cladding a Feature Wall

Let's say you're planning to clad a prominent exterior feature wall on a home in zip code 90210. The wall measures 15 feet wide and 9 feet high. You want a clean, modern look with distinct shadow lines and have decided on the Thermally Modified Ash S4S E4E End Match profile, nominal size 1 × 6 Plus.

Here's what your quote request might include:

Project Type: Exterior Feature Wall Cladding

Material: Thermally Modified Ash

Profile: S4S E4E End Match, nominal 1 × 6 Plus (actual coverage approximately 5.125 inches per board)

Dimensions: One wall section, 15 feet (width) x 9 feet (height). Total area: 135 square feet.

Calculated Linear Footage (for reference): 135 sq ft / (5.125 inches / 12 inches/ft) = 135 / 0.427 = 316.16 linear feet. Adding a 10% waste factor: 316.16 * 1.10 = 347.78 linear feet. (We would round up to the nearest full board length for purchase quantities).

Project ZIP Code: 90210

Desired Delivery: Within the next 6-8 weeks.

Site Access: Good, standard truck delivery. No unusual restrictions.

This level of detail allows for a precise material takeoff, accurate pricing including freight, and confirmation that the selected profile is appropriate for your intended application. It also provides a basis for discussing any potential alternatives or optimizations.

Before you order

• Have I measured all project dimensions (length, width, height) accurately in feet and inches?
• Do I know the specific Thermally Modified Ash profile(s) I want (e.g., S4S E4E End Match 1 × 6 Plus, S4S E4E 2 × 4)?
• Have I clearly stated the intended application for the material (e.g., exterior cladding, interior feature wall, decking)?
• Is my project's ZIP code included for a freight estimate?
• Have I noted any special delivery considerations or site access limitations?
• Do I have a preferred timeline for material delivery?
• Have I considered a waste factor for cuts and potential imperfections (e.g., 10-15%)?
• Are there any complementary products I might need (e.g., fasteners, trim)?
• Am I ready to confirm current availability and service options?

Confirm installation details, approved uses and warranty terms in the current instructions for the exact product and profile. Your installer should verify the substrate, structure and applicable project requirements.

Questions to help you decide

Keep planning your project